Federal Aviation Administration

As part of its Next Generation Air Transportation System (NextGen) initiative, the FAA is also modernizing navigation and procedures for both fixed-wing and rotorcraft operations. The agency has overseen the large-scale deployment of performance-based navigation (PBN) routes and procedures, including RNAV and RNP approaches supported by satellite-based augmentation systems, and has worked with industry safety teams and user groups to apply these tools at smaller airports, heliports and in low-altitude corridors used by air ambulance and other helicopter operators.

The FAA is headquartered in Washington, D.C., and also operates the William J. Hughes Technical Center near Atlantic City, New Jersey, for support and research, and the Mike Monroney Aeronautical Center in Oklahoma City, Oklahoma, for training. The FAA has nine regional administrative offices:

The Air Commerce Act of May 20, 1926, is the cornerstone of the U.S. federal government's regulation of civil aviation. This landmark legislation was passed at the urging of the aviation industry, whose leaders believed the airplane could not reach its full commercial potential without federal action to improve and maintain safety standards. The Act charged the Secretary of Commerce with fostering air commerce, issuing and enforcing air traffic rules, licensing pilots, certifying aircraft, establishing airways, and operating and maintaining aids to air navigation. The newly created Aeronautics Branch, operating under the Department of Commerce assumed primary responsibility for aviation oversight.

In fulfilling its civil aviation responsibilities, the U.S. Department of Commerce initially concentrated on such functions as safety regulations and the certification of pilots and aircraft. It took over the building and operation of the nation's system of lighted airways, a task initiated by the Post Office Department. The Department of Commerce improved aeronautical radio communications—before the founding of the Federal Communications Commission in 1934, which handles most such matters today—and introduced radio beacons as an effective aid to air navigation.

The Aeronautics Branch was renamed the Bureau of Air Commerce in 1934 to reflect its enhanced status within the Department. As commercial flying increased, the Bureau encouraged a group of airlines to establish the first three centers for providing air traffic control (ATC) along the airways. In 1936, the Bureau itself took over the centers and began to expand the ATC system. The pioneer air traffic controllers used maps, blackboards, and mental calculations to ensure the safe separation of aircraft traveling along designated routes between cities.

In 1938, the Civil Aeronautics Act transferred the federal civil aviation responsibilities from the Commerce Department to a new independent agency, the Civil Aeronautics Authority. The legislation also expanded the government's role by giving the CAA the authority and the power to regulate airline fares and to determine the routes that air carriers would serve.

President Franklin D. Roosevelt split the authority into two agencies in 1940: the Civil Aeronautics Administration (CAA) and the Civil Aeronautics Board (CAB). …

The FAA has been cited as an example of regulatory capture, "in which the airline industry openly dictates to its regulators its governing rules, arranging for not only beneficial regulation, but placing key people to head these regulators." Retired NASA Office of Inspector General Senior Special Agent Joseph Gutheinz, who used to be a Special Agent with the Office of Inspector General for the Department of Transportation and with FAA Security, is one of the most outspoken critics of FAA. Rather than commend the agency for proposing a $10.2 million fine against Southwest Airlines for its failure to conduct mandatory inspections in 2008, he was quoted as saying the following in an Associated Press story: "Penalties against airlines that violate FAA directives should be stiffer. At $25,000 per violation, Gutheinz said, airlines can justify rolling the dice and taking the chance on getting caught." He also said the FAA is often too quick to bend to pressure from airlines and pilots. Other experts have been critical of the constraints and expectations under which the FAA is expected to operate. The dual role of encouraging aerospace travel and regulating aerospace travel are contradictory. For example, to levy a heavy penalty upon an airline for violating an FAA regulation which would impact their ability to continue operating would not be considered encouraging aerospace travel.

On July 22, 2008, in the aftermath of the Southwest Airlines inspection scandal, a bill was unanimously approved in the House to tighten regulations concerning airplane maintenance procedures, including the establishment of a whistleblower office and a two-year "cooling off" period that FAA inspectors or supervisors of inspectors must wait before they can work for those they regulated. The bill also required rotation of principal maintenance inspectors and stipulated that the word "customer" properly applies to the flying public, not those entities regulated by the FAA. The bill died in a Senate committee that year.

In September 2009, the FAA administrator issued a directive mandating that the agency use the term "customers" to refer to only the flying public.

In 2007, two FAA whistleblowers, inspectors Charalambe "Bobby" Boutris and Douglas E. …

A Designated Engineering Representative (DER) is an engineer who is appointed under 14 CFR section 183.29 to act on behalf of a company or as an independent consultant (IC). The DER system enables the FAA to delegate certain involvement in airworthiness exams, tests, and inspections to qualified technical people outside of the FAA. Qualifications and policies for appointment of Designated Airworthiness Representatives are established in FAA Order 8100.8, Designee Management Handbook. Working procedures for DERs are prescribed in FAA Order 8110.37, Designated Engineering Representative (DER) Handbook.

Neither type of DER is an employee of either the FAA or the United States government. While a DER represents the FAA when acting under the authority of a DER appointment; a DER has no federal protection for work done or the decisions made as a DER. Neither does the FAA provide any indemnification for a DER from general tort law. "The FAA cannot shelter or protect DERs from the consequences of their findings."

A DAR is an individual appointed in accordance with 14 CFR 183.33 who may perform examination, inspection, and testing services necessary to the issuance of certificates. There are two types of DARs: manufacturing, and maintenance.

Specialized Experience – Amateur-Built and Light-Sport Aircraft DARs Both Manufacturing DARs and Maintenance DARs may be authorized to perform airworthiness certification of light-sport aircraft. DAR qualification criteria and selection procedures for amateur-built and light-sport aircraft airworthiness functions are provided in Order 8100.8.

A Continued Airworthiness Notification to the International Community (commonly abbreviated as CANIC) is a notification from the FAA to civil airworthiness authorities of foreign countries of pending significant safety actions.

The FAA Airworthiness Directives Manual, states the following:

8. Continued Airworthiness Notification to the International Community (CANIC).

In 2019 "The FAA issued a CANIC to state the continued airworthiness of the Boeing 737 MAX, following the crash of Ethiopian Airlines Flight 302." "Another CANIC notified the ungrounding of the MAX, ending a 20-month grounding."

U.S. law requires that the FAA's budget and mandate be reauthorized on a regular basis. …